Orsatmax

User Tools

Site Tools

Trace:
start

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
start [2025/07/10 10:40]
162.158.175.199 old revision restored (2025/07/07 03:51) 		start [2025/07/10 10:40] (current)
172.69.67.115 old revision restored (2025/07/07 03:50)
Line 9: Line 9:
  
 The PAMS AutoGC systems collect not only hourly ambient air data but also have Quality Control samples which are outlined in the EPA PAMS Technical Assistance Guidance document (**TAD**).  While most agencies have large databases capable of accumulating ambient data for review by policy makers, they do not always have the ability to review large amounts of quality control data associated with these highly technical systems.  MAX was designed specifically to allow program managers, operators and data validators to review both the ambient data and the quality control samples to evaluate in near real-time the performance of their systems.  Multiple QC sample types are specified by the EPA TAD to reconcile the performance of each analyzer. The PAMS AutoGC systems collect not only hourly ambient air data but also have Quality Control samples which are outlined in the EPA PAMS Technical Assistance Guidance document (**TAD**).  While most agencies have large databases capable of accumulating ambient data for review by policy makers, they do not always have the ability to review large amounts of quality control data associated with these highly technical systems.  MAX was designed specifically to allow program managers, operators and data validators to review both the ambient data and the quality control samples to evaluate in near real-time the performance of their systems.  Multiple QC sample types are specified by the EPA TAD to reconcile the performance of each analyzer.
- === Quality Control Sample Types === +  * Quality Control Sample Types
-  - Calibration Verification Standard (CVS) or Continuing Calibration Verification (CCV) Standard  +
-      * Required daily +
-      * Used to confirm system response daily; recoveries generally ± 30% specified in the Network configuration +
-  - System Blank (SB) or Method Blank +
-      * Required daily +
-      * Used to determine concentrations of target compounds which may be contributed by the analytical system +
-  - Laboratory Calibration Standard (LCS) or Second Source Calibration Verification (SSCV) Standard +
-      * Required weekly +
-      * Used to confirm original calibration by reference. +
-  - Retention Time Standard (RTS) +
-      * Required weekly +
-      * Used to verify correct target identification by retention time windows in method.+
  
  QC.png - I don't have rights to upload documents.  QC.png - I don't have rights to upload documents.
-=== Format for Incoming Data - ASCII Text === 
-The output format for data generated by the analytical data system must adhere to a specific ASCII text format to enable MAX to be able to correctly interpret and store the data.  Orsat has generated output formats for both the Totalchrom and EZChrom data systems.  The user will not only need this format for the output but will need their analytical method to adhere to specific requirements such as target names, response factor format and calibration untis.  Orsat can assist by supplying methods for each analytical and help the user to implement any necessary changes that might be required. 
- 
- 
- 
-==== Network and Site Configuration ==== 
  
 In order to allow the evaluation of these QC samples each data set or //Site// has a definition which incorporates configuration parameters for the //Network// which defines information about incoming data such as a list of target VOCs, which targets will be in the QC samples and their concentrations and control limits.  These parameters will be used by the system to calculate and display QC recoveries and threshold exceedances.  A //Network// may have multiple sites or a single site depending on the agency and the number of PAMS sites they operate.  The Network configuration also includes information about the site which is required to generate the EPA required Air Quality System (**AQS**) data file which is submitted for each site to incorporate the ambient data into the EPA AQS system.   In order to allow the evaluation of these QC samples each data set or //Site// has a definition which incorporates configuration parameters for the //Network// which defines information about incoming data such as a list of target VOCs, which targets will be in the QC samples and their concentrations and control limits.  These parameters will be used by the system to calculate and display QC recoveries and threshold exceedances.  A //Network// may have multiple sites or a single site depending on the agency and the number of PAMS sites they operate.  The Network configuration also includes information about the site which is required to generate the EPA required Air Quality System (**AQS**) data file which is submitted for each site to incorporate the ambient data into the EPA AQS system.  
-=== Information Required for Network Configuration ===+    === Information Required for Network Configuration ===
  
   - Units (default is ppbC)   - Units (default is ppbC)
Line 44: Line 26:
 Each Site also has unique information to identify it in the database.  In addition to a  specific  Each Site also has unique information to identify it in the database.  In addition to a  specific 
  
-=== Information Required for Site Configuration === 
  
-  - Site name (defined in the incoming ASCII text file as "SITE-//x//" where //x// can be from 1-3 characters) 
-  - Type - designation of data system generating the data, PerkinElmer or EZChrom 
-  - Minimum display value - generally 0 
-  - Network assigned to the site 
-  - AQS number assigned to the site 
-  - POC if necessary 
-  - Short name - user entered text field 
-  - Formal name - user entered text field 
-  - Address, City and Zipcode 
-  - Latitude and Longitude 
-  - UTC offset 
-  - CAMS code (if available) 
-  - Interval, units code and method codes required for AQS file generation  
  
  
----- 
  
    *  Operator    *  Operator
Line 71: Line 38:
   *   Validator    *   Validator 
  
----- 
  
 **References** **References**
start.txt · Last modified: 2025/07/10 10:40 by 172.69.67.115

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
CC Attribution-Share Alike 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki